Correct procedures for using grass grabbing machines

Correct procedures for using grass grabbing machines:
1. Drivers must undergo technical training to familiarize themselves with the performance, construction, operation, and maintenance of loaders and grass grabbers.
2. It is strictly prohibited for drivers who are drunk or have mental disorders to operate the machine, and it is strictly prohibited to drive with illness or fatigue.
3. During driving operations, drivers need to concentrate and not look left or right. They should pay attention to the direction of travel and those working around them, and sound the horn to warn when there is danger.
4. During driving operations, passengers in the driver's cab are not allowed to overload, and passengers are strictly prohibited from other parts.
5. Before and after daily operations, a walkaround inspection is required to ensure the guarantee of operations.
6. Before starting, check the condition of fuel, cold water, lubricating oil, and hydraulic oil. If there is a leak, promptly handle it, and if there is a lack, adjust and supplement it in a timely manner.
7. Check if all connecting parts are worn or loose. Check if the tire pressure meets the regulations. Check the tension of the fan belt and check the air filter indicator.
8. Check whether the lighting, instruments, horns, and other components are normal.
9. The engine should not start for more than 5 seconds each time. If one start is unsuccessful, it must wait for 30 seconds before starting again. If three starts are unsuccessful, the cause should be checked and the fault should be resolved before starting again.
10. After starting, idle and idle the engine to check if all instruments are normal. If there are any abnormalities, stop the engine immediately to check the cause. The driver can only operate when the buzzer "beeps" and disappears without any abnormal vibration, noise, or odor.
11. Before operation, test the equipment and check if the steering, braking, and working systems are sensitive.
12. During driving, it is necessary to regularly pay attention to whether the index of each instrument meets the specified requirements.
13. When traveling, place the bucket at a height of about 0.5m above the ground; Do not lift the bucket too high to transport materials; Do not lift the bucket while driving.
14. When working on slopes or crossing obstacles such as ditches, slow down, make small corners, and be careful not to tip over. Advance uphill and retreat downhill.